Nashik combines automotive and engineering estates, a large wine and beverage sector, and growing food and pharma capacity. We manufacture and electropolish SS 316L and 304L pipes and tubes and supply Nashik's plants directly, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
Nashik's industry is spread across several MIDC estates. Satpur is the oldest and hosts automotive and engineering plants. Ambad is a base for small and mid-size precision engineering and plastics units, and it has a container freight station that supports exports. Sinnar and the Malegaon MIDC are the district's large-manufacturing, power and logistics zone, and Igatpuri, Dindori and Vinchur add agro and food processing. On top of the estates, Nashik is India's main wine region, with wineries across the valley. A wine fermentation line, a pharma purified-water loop and a skid-builder's frame are three different jobs, and we supply all three.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Satpur MIDC | Automotive and engineering plants | Clean utility, purified water, skid assemblies | 304L / 316L |
| Ambad MIDC | SME precision engineering, plastics, fabricators | Skid frames, hygienic assemblies, export-grade documents | 304L, cut to drawing |
| Sinnar / Malegaon MIDC | Large manufacturing, power, logistics | Process utility, clean-water systems | 304L / 316L |
| Nashik wineries and wine park | Wine and beverage | Transfer, fermentation-side and bottling-line tubing | 304L; 316L for high-SO₂ or chloride-bearing cleaning |
| Igatpuri / Dindori (Palkhed) / Vinchur | Food and agro processing | Hygienic transfer | 304L |
A smooth, passivated interior that cleans easily and does not hold residue or yeast buildup.
316L with a measured Ra and verified passivation for formulation facilities.
A smooth bore cleans faster and drains better across process shifts.
Cut-to-length pipe with heat-number traceability for fabricators serving Nashik's plants.
Hygienic transfer for Igatpuri, Dindori and Vinchur food clusters.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 304L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.11 mm | ≤0.4 µm | ASTM A269 |
| SS 304L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Welded | 8" to 12" (219.1–323.9 mm) | 2.77–3.05 mm | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation.
Every pipe we supply to Nashik adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: