Tarapur MIDC is a planned chemical hub with pharma and intermediates plants spread across more than a thousand hectares. We manufacture and electropolish SS 316L and duplex 2205 pipes and tubes and supply Tarapur's clean-utility and process lines, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
Tarapur MIDC sits on the Palghar coast north of Mumbai and is one of Maharashtra's main planned chemical estates. Pharma and API units, specialty-chemical plants and intermediates makers work side by side, and so do textile-processing units. They need different things. A pharma unit needs a measured surface finish and a document trail its auditors can follow. A chemical unit needs the right alloy for its media. We supply both from one factory, and we ask for your media before we quote.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Tarapur MIDC, pharma and API units | Pharma formulation, APIs and intermediates | Purified water, WFI, clean utility | 316L, internal Ra ≤0.4 µm, surface report |
| Tarapur MIDC, specialty chemical units | Specialty chemicals and intermediates | Process transfer, utility | 316L; duplex 2205 after a media check |
| Boisar / Salwad / Kolavade | Mixed chemical, pharma and textile-processing units | Process water, dosing and utility lines | 316L / 304L |
316L with a smooth internal surface and verified passivation.
DM-water, sampling and instrument lines where cleanliness matters.
Duplex 2205, once we have seen your fluid, concentration and temperature.
316L where dye-house salts bring chlorides, 304L for plain utility.
Cut-to-length pipe with heat-number traceability for fabricators serving Tarapur's plants.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 316L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm (SF4) | ASTM A269 / A270, ASME BPE |
| SS 316L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.77 mm / SCH 40S | ≤0.4 µm (SF4) | ASTM A269, ASME BPE |
| SS 316L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 316L | Seamless | 2½" to 6" (63.5–152.4 mm) | 2.77–3.05 mm / SCH 40S | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation.
Every pipe we supply to Tarapur adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: