Tumakuru is the first node on Karnataka's stretch of the Chennai–Bengaluru industrial corridor, with a large industrial area at Vasanthanarasapura that hosts pharma and bulk-drug units. We manufacture and electropolish SS 316L and 304L pipes and tubes and supply Tumakuru's plants directly, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
Tumakuru sits about 70 km north-west of Bengaluru on the Pune–Bengaluru highway, and its industry has grown as an extension of Bengaluru's. The district's main industrial area is Vasanthanarasapura, where the state has been developing a large investment zone around the existing phases, and pharma and bulk-drug units are among its tenants. The city has its own industrial estates, and the wider district adds food and agro processing, engineering and, near Gubbi, aerospace. Plants here are often new or expanding, so piping is frequently specified at design stage.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Vasanthanarasapura Industrial Area (Phases I-III) and investment zone | Pharma and bulk-drug units, food, engineering, new-build plants | WFI, purified water, process utility, design-stage specs | 316L, internal Ra ≤0.4 µm, surface report |
| Tumakuru city industrial areas (Antharasanahalli, Kora) | Food, engineering, small manufacturers | Hygienic transfer, clean utility, skid assemblies | 304L / 316L |
| Gubbi and the aerospace belt | Aerospace and defence manufacturing | Clean utility, DM water | 304L / 316L |
| Tiptur, Sira, Madhugiri (district towns) | Coconut and agro processing | Hygienic transfer, CIP | 304L |
316L with a smooth internal surface and verified passivation.
Quotes against your drawings and specification at design stage, with the document pack you'll need for commissioning.
A smooth bore cleans faster and drains better, which matters for food and beverage.
Cut-to-length pipe with heat-number traceability for fabricators serving Tumakuru's plants.
Hygienic tubing for lines handled with caustic or acid cleaning, once we've checked your media.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 316L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm (SF4) | ASTM A269 / A270, ASME BPE |
| SS 316L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.77 mm / SCH 40S | ≤0.4 µm (SF4) | ASTM A269, ASME BPE |
| SS 316L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 316L | Seamless | 2½" to 6" (63.5–152.4 mm) | 2.77–3.05 mm / SCH 40S | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation.
Every pipe we supply to Tumakuru adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: