Mysuru is a food, FMCG and precision-manufacturing district, with a pharma and distillery belt around Nanjangud and a growing medical-device cluster. We manufacture and electropolish SS 316L and 304L pipes and tubes and supply Mysuru's plants directly, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
Mysuru's industry sits in two main belts. The Hebbal industrial area on the north-west edge, with Hootagalli, Belawadi, Belagola and Koorgalli, hosts engineering, precision and medical-device plants. To the south, the Nanjangud and Thandya–Kadakola belts are the district's food, FMCG, pharma and distillery zone, and the state has been developing new layouts there, including an electronics cluster at Kochanahalli. The city also houses the Central Food Technological Research Institute (CFTRI), which gives the region a food-science base.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Hebbal Industrial Area (Hebbal, Hootagalli, Belawadi, Belagola, Koorgalli) | Engineering, medical devices, precision manufacturing, electronics | Clean utility, DM water, laboratory lines, skid assemblies | 304L / 316L, cut to drawing |
| Metagalli | Pharma and healthcare products | Purified water, process utility | 316L, internal Ra ≤0.4 µm, surface report |
| Thandya, Kadakola and Immavu (Nanjangud taluk) | Food, FMCG and engineering; new electronics cluster at Kochanahalli | Hygienic transfer, CIP, clean utility, design-stage specs | 304L / 316L |
| Nanjangud Industrial Area | Food and FMCG, pharma, distillery | CIP, purified water, clean-side process water | 304L / 316L after a media check |
| Industrial Suburb (1st-3rd Stage), Mysuru city | Small manufacturers and food units | Hygienic and general utility | 304L |
A smooth, passivated interior that cleans easily and doesn't hold residue, for plants at Kadakola and Nanjangud.
316L with a measured Ra and verified passivation, for pharma and healthcare units.
Clean-utility, DM-water and laboratory lines for Hebbal plants.
A smooth bore cleans faster and drains better.
Cut-to-length pipe with heat-number traceability for Mysuru's fabricators.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 304L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.11 mm | ≤0.4 µm | ASTM A269 |
| SS 304L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Welded | 8" to 12" (219.1–323.9 mm) | 2.77–3.05 mm | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation.
Every pipe we supply to Mysuru adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: