Electropolished Pipe Fittings

Electropolished Tee – Sanitary Three-Way Fitting

Quick Technical Summary

Electropolished Tee: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, ASME BPE compliant, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.

Electropolished Tees split or combine flow in sanitary tubing systems, machined and orbital-welded for a hygienic, crevice-free branch connection.

Key Features

Three-way hygienic branch connection Orbital TIG weld ends Electropolished to Ra ≤15 µin (0.38 µm) Fully drainable, no dead legs

Technical Specifications

ProductElectropolished Tee
GradeSS 316L / 316, SS 304L (as specified)
Size Range1/2" – 6" Tube OD
Surface FinishRa ≤15 µin (0.38 µm)
End ConnectionOrbital Weld / Buttweld
Wall ThicknessMatched to the tube wall (ASME BPE: 0.065" / 1.65 mm for 1/2"–3" OD)
StandardsASME BPE, ISO 1127, DIN 11850
Target IndustriesPharmaceutical
Available GradesSS 316L / 316, SS 304L (as specified)

Target Application Industries

PharmaceuticalBiotechnologyFood & BeverageDairyCosmetics

Applications & Service Areas

Branch Piping | Process Skid Manifolds | CIP/SIP Distribution
Electropolished Tee
Quick Quotation

Request Price & Specs

MTC EN 10204 3.1 & Inspection provided
Pan-India & global sea-freight dispatch
Custom dimensions/drawings supported
Quotation within 24 hours

Equal and Reducing Tees in Hygienic Systems

An electropolished tee splits or joins flow at 90°. An equal tee has three ports of the same size; a reducing tee has a smaller branch, typically for a sample point, instrument or drop to a use point. In ASME BPE tube systems tees are made with weld tangents on all ports so each joint can be orbital welded.

The engineering problem with any tee is the branch that is closed while the main line flows. Liquid in a closed branch does not move during operation or cleaning, and that stagnant pocket is the classic dead leg.

Keeping the Branch Short: the Dead-Leg Rule

ASME BPE expresses dead legs as a ratio of branch length to branch diameter, L/D, and recommends keeping it at 2 or less for product-contact systems. In practice that means choosing a tee with the shortest branch that still leaves room for the weld or clamp, and mounting valves directly on the tee rather than on a spool. For instrument connections a short-outlet instrument tee keeps L/D low.

Orientation matters too: on a horizontal header, a branch pointing up traps gas and one pointing down traps liquid; the right choice depends on what the branch carries and how it drains.

Ordering Electropolished Tees

  • Run and branch OD and wall, in one dimension series.
  • Branch length if your dead-leg calculation needs a short outlet.
  • End types on each port (weld tangent or clamp ferrule).
  • Grade, internal Ra and documents: EN 10204 3.1 certificate traced to heat number, PMI record per piece and a measured Ra report for each electropolished lot.
Request a tee quotation

Last updated 2026-11-03

Frequently Asked Questions

Read commonly asked questions about specifying and ordering Electropolished Tee.

ASME BPE recommends an L/D ratio of 2 or less for product-contact branches, measured on the branch length against its inside diameter.

Partner with Sakshi Forge for Reliable Industrial Steel Solutions

Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.

We use cookies for analytics and to improve your quote experience. See our Privacy Policy.