HomeElectropolished Pipe FittingsElectropolished Reducing Tee
Electropolished Pipe Fittings

Electropolished Reducing Tee – Sanitary Branch Fitting with Size Transition

Quick Technical Summary

Electropolished Reducing Tee: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, ASME BPE compliant, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.

Electropolished Reducing Tees connect a smaller branch line to a larger sanitary run, combining a hygienic branch connection with a size transition in one fitting.

Key Features

Run and branch of different bore sizes Orbital TIG weld ends Electropolished to Ra ≤15 µin (0.38 µm) Fully drainable, crevice-free design

Technical Specifications

ProductElectropolished Reducing Tee
GradeSS 316L / 316, SS 304L (as specified)
Size Range1/2" – 6" x 1/2" – 4" Tube OD
Surface FinishRa ≤15 µin (0.38 µm)
End ConnectionOrbital Weld / Buttweld
Wall ThicknessMatched to the tube wall (ASME BPE: 0.065" / 1.65 mm for 1/2"–3" OD)
StandardsASME BPE, ISO 1127, DIN 11850
Target IndustriesPharmaceutical
Available GradesSS 316L / 316, SS 304L (as specified)

Target Application Industries

PharmaceuticalBiotechnologyFood & BeverageDairyCosmetics

Applications & Service Areas

Branch Connections with Size Reduction | Sampling Point Tie-ins
Electropolished Reducing Tee
Quick Quotation

Request Price & Specs

MTC EN 10204 3.1 & Inspection provided
Pan-India & global sea-freight dispatch
Custom dimensions/drawings supported
Quotation within 24 hours

Where a Reducing Tee Is Used

A reducing tee takes a smaller branch off a larger run. In a purified-water or WFI loop it is the usual fitting for a use point, a sample valve or a drop to equipment; in a CIP header it feeds a smaller supply line. Because the branch is smaller than the run, the velocity in the main line sweeps the branch entrance during circulation, which helps keep a short branch clean.

In ASME BPE dimensional tables reducing tees are listed by run and branch OD, with weld tangents on each port. Order them in the same dimension series as the tube and confirm that the branch wall matches the branch tube.

Design Checks Before Ordering

  • Dead leg: keep the closed branch at an L/D of 2 or less by mounting the use-point valve directly on the tee.
  • Velocity: a run sized for normal flow but too large for CIP leaves the branch entrance poorly swept; check the run size against the cleaning flow.
  • Branch orientation: point use-point branches downward or horizontally so they drain to the valve.
  • Finish continuity: the branch bore should carry the same electropolished finish as the run.

Ordering Reducing Tees

  • Run OD x branch OD, with walls for each.
  • Dimension series and end types.
  • Grade, internal Ra and documents: EN 10204 3.1 certificate traced to heat number, PMI record per piece and a measured Ra report for each electropolished lot.
Request a reducing tee quotation

Last updated 2026-11-03

Frequently Asked Questions

Read commonly asked questions about specifying and ordering Electropolished Reducing Tee.

At use points, sample valves and equipment drops on purified-water and WFI loops, and to feed smaller lines from CIP headers.

Partner with Sakshi Forge for Reliable Industrial Steel Solutions

Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.

We use cookies for analytics and to improve your quote experience. See our Privacy Policy.