HomeElectropolished Pipe FittingsElectropolished Eccentric Reducer
Electropolished Pipe Fittings

Electropolished Eccentric Reducer – Offset-Taper Sanitary Reducer

Quick Technical Summary

Electropolished Eccentric Reducer: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, ASME BPE compliant, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.

Electropolished Eccentric Reducers taper with one side kept flush, commonly used on horizontal sanitary lines to ensure full self-drainage and prevent product hold-up.

Key Features

Offset taper with one flush side Full self-drainage on horizontal runs Orbital TIG weld ends Electropolished to Ra ≤15 µin (0.38 µm)

Technical Specifications

ProductElectropolished Eccentric Reducer
GradeSS 316L / 316, SS 304L (as specified)
Size Range1/2" x 1/4" – 6" x 4" Tube OD
Surface FinishRa ≤15 µin (0.38 µm)
End ConnectionOrbital Weld / Buttweld
Wall ThicknessMatched to the tube wall (ASME BPE: 0.065" / 1.65 mm for 1/2"–3" OD)
StandardsASME BPE, ISO 1127, DIN 11850
Target IndustriesPharmaceutical
Available GradesSS 316L / 316, SS 304L (as specified)

Target Application Industries

PharmaceuticalBiotechnologyFood & BeverageDairy

Applications & Service Areas

Horizontal Self-Draining Lines | Gravity Flow Reductions
Electropolished Eccentric Reducer
Quick Quotation

Request Price & Specs

MTC EN 10204 3.1 & Inspection provided
Pan-India & global sea-freight dispatch
Custom dimensions/drawings supported
Quotation within 24 hours

Why Hygienic Horizontal Lines Use Eccentric Reducers

An eccentric reducer has one flat side in line with the wall of both tubes. Installed flat side down on a horizontal line, it gives a continuous bottom with no step, so the line drains completely after CIP. That makes it the standard size change on sloped product, purified-water and CIP lines.

The same fitting installed flat side up is used at pump suctions on process lines to avoid trapping air at the top. Hygienic lines usually prioritise drainage, so mark the orientation on the isometric and check it at installation.

Installation Checks

  • Flat side down for drainability on sloped horizontal lines; flat side up only where air entrapment is the concern.
  • Keep the line slope continuous through the reducer; a reducer turned off-vertical by a few degrees creates a small pocket.
  • For vertical lines, use a concentric reducer instead.

Ordering Eccentric Reducers

  • Large OD x small OD and walls.
  • Dimension series and end types.
  • Grade, internal Ra and documents: EN 10204 3.1 certificate traced to heat number, PMI record per piece and a measured Ra report for each electropolished lot.
Request an eccentric reducer quotation

Last updated 2026-11-03

Frequently Asked Questions

Read commonly asked questions about specifying and ordering Electropolished Eccentric Reducer.

Flat side down on horizontal lines, so the bottom of the line is continuous and drains completely.

Partner with Sakshi Forge for Reliable Industrial Steel Solutions

Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.

We use cookies for analytics and to improve your quote experience. See our Privacy Policy.