HomeElectropolished Pipe FittingsElectropolished Concentric Reducer
Electropolished Pipe Fittings

Electropolished Concentric Reducer – Centerline-Aligned Sanitary Reducer

Quick Technical Summary

Electropolished Concentric Reducer: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, ASME BPE compliant, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.

Electropolished Concentric Reducers taper symmetrically from a larger to a smaller tube diameter along a common centerline, used in vertical or centered sanitary flow lines.

Key Features

Symmetric, centerline-aligned taper Orbital TIG weld ends Electropolished to Ra ≤15 µin (0.38 µm) Smooth internal flow transition

Technical Specifications

ProductElectropolished Concentric Reducer
GradeSS 316L / 316, SS 304L (as specified)
Size Range1/2" x 1/4" – 6" x 4" Tube OD
Surface FinishRa ≤15 µin (0.38 µm)
End ConnectionOrbital Weld / Buttweld
Wall ThicknessMatched to the tube wall (ASME BPE: 0.065" / 1.65 mm for 1/2"–3" OD)
StandardsASME BPE, ISO 1127, DIN 11850
Target IndustriesPharmaceutical
Available GradesSS 316L / 316, SS 304L (as specified)

Target Application Industries

PharmaceuticalBiotechnologyFood & BeverageDairy

Applications & Service Areas

Vertical Line Reductions | Centered Flow Transitions
Electropolished Concentric Reducer
Quick Quotation

Request Price & Specs

MTC EN 10204 3.1 & Inspection provided
Pan-India & global sea-freight dispatch
Custom dimensions/drawings supported
Quotation within 24 hours

Concentric or Eccentric: Choosing by Line Orientation

A concentric reducer changes tube size along a common centreline. It is the right choice on vertical lines and at pump discharges, where symmetry matters and drainage is by gravity down the line. On a horizontal line, a concentric reducer leaves a step at the bottom of the larger tube that holds liquid after draining; there an eccentric reducer, installed with the flat side down, keeps the line drainable.

In ASME BPE systems, reducers have weld tangents at both ends and are listed by large OD x small OD. The electropolished bore should match the finish of the tube on both sides.

Common Mistakes

  • Using a concentric reducer on a horizontal product line, leaving a pool behind the step.
  • Reducing by two or more sizes in one fitting where a standard reducer for that pair does not exist, and then fabricating a cone with an internal weld.
  • Ordering reducers in a different dimension series from the tube on one side.

Ordering Concentric Reducers

  • Large OD x small OD and walls.
  • Dimension series and end types.
  • Grade, internal Ra and documents: EN 10204 3.1 certificate traced to heat number, PMI record per piece and a measured Ra report for each electropolished lot.
Request a reducer quotation

Last updated 2026-11-03

Frequently Asked Questions

Read commonly asked questions about specifying and ordering Electropolished Concentric Reducer.

On vertical lines and pump discharges. On horizontal lines an eccentric reducer installed flat side down keeps the line drainable.

Partner with Sakshi Forge for Reliable Industrial Steel Solutions

Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.

We use cookies for analytics and to improve your quote experience. See our Privacy Policy.