Howrah is Kolkata's industrial twin across the river, known for foundries, wire and engineering workshops, with a cluster of food parks at Sankrail and industrial parks at Uluberia, Amta and Bagnan. We manufacture and electropolish SS 304L and 316L pipes and tubes and supply Howrah's food plants and fabricators directly, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Sankrail food parks (three parks, about 34-54 acres each) | Food and agro processing | Hygienic transfer, wash lines, CIP, clean utility | 304L; 316L for chloride-bearing wash or sanitiser |
| Uluberia Industrial Park (WBIIDC) | Engineering and mixed manufacturing | Clean utility, DM water, skid assemblies | 304L / 316L, cut to drawing |
| Amta and Bagnan industrial parks | Mixed manufacturing and agro | Hygienic transfer, clean utility | 304L |
| Ankurhati SME and logistics parks | Small manufacturers and warehousing | Small-lot fabrication and utility lines | 304L, small lots |
| Howrah engineering workshops and fabricators | Equipment and process-machinery makers | Headers, skids, tank pipework, cut to drawing | 304L / 316L, traceable cut lengths |
| Foundry, wire, re-rolling, hosiery and rubber belts | Metal and rubber processing, garments | Dry or abrasive; clean-utility lines only | n/a |
A smooth, passivated interior that cleans easily and doesn't hold residue, for plants that wash, blend or heat their product.
Hygienic tubing for milk transfer, juices and drinks, with 316L where acidity or chlorides call for it.
A smooth bore cleans faster and drains better, which matters for caustic and acid wash cycles.
DM-water, process-water and laboratory lines where cleanliness matters.
Cut-to-length pipe with heat-number traceability for the Howrah shops that build machinery and skids.
Cut lengths and custom sizes in small lots, with the same document pack as large orders.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 304L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.11 mm | ≤0.4 µm | ASTM A269 |
| SS 304L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm | ≤0.4 µm | ASTM A269 / A270 |
| SS 304L | Welded | 8" to 12" (219.1–323.9 mm) | 2.77–3.05 mm | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation. We cap the pipe ends, sleeve each length and pack for the journey and for humid, riverside air, so the electropolished finish arrives undamaged. If your project has a fixed date, tell us when you enquire and we'll say plainly whether it fits.
Every pipe we supply to Howrah adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: