Bidar's Kolhar Industrial Area holds one of Karnataka's densest clusters of pharma, bulk-drug and intermediates plants. We manufacture and electropolish SS 316L and 304L pipes and tubes and supply Bidar's plants directly, with MTC EN 10204 3.1, 100% PMI testing and a measured Ra report on every order.
Bidar sits on Karnataka's north-eastern edge, and its industry is concentrated rather than spread out. The Kolhar Industrial Area, a KIADB estate outside the city, is the district's pharma cluster, with a long list of API, bulk-drug and intermediates units. The Humnabad Industrial Area, further west, is a second pharma and bulk-drug estate, and several units there have been expanding. Around them, a distillery and sugar belt runs through Hallikhed, Malachapura and Baroor. A word on fit: Many plants here make APIs and intermediates by chemical synthesis. The reactor-side solvent and acid lines in that work often need other materials. Where we're useful is the clean side: purified water, clean utility, laboratory lines and new-build specifications.
| Zone / MIDC | Typical End-Use | Application | Our Usual Spec |
|---|---|---|---|
| Kolhar Industrial Area | Pharma, API and intermediates plants | Purified water, clean utility, laboratory and QC lines | 316L, internal Ra ≤0.4 µm, surface report |
| Humnabad Industrial Area (KIADB) | Bulk-drug and intermediates plants, expanding units | Purified-water and utility lines, design-stage specs for expansions | 316L, project quotes |
| Distillery and sugar belt (Hallikhed, Malachapura, Baroor) | Distillery, ethanol and sugar | Clean-side process water, condensate and ethanol-handling lines | 316L / 304L after a media check |
| Balki, Imampur and other Bidar-taluk estates | Small pharma, agro and manufacturing units | Hygienic and clean-utility lines | 304L / 316L |
316L with a smooth internal surface and verified passivation.
Clean, documented tubing for in-plant QC and R&D labs.
Quotes against your drawings at design stage, with the document pack you'll need for commissioning.
A smooth bore cleans faster and drains better.
Process water, condensate and ethanol-handling lines, once we've checked your media.
| Grade | UNS | WNR (EN) | Typical Process Use |
|---|---|---|---|
| SS 316L | S31603 | 1.4404 | Pharma, biotech, WFI loops, chloride or aggressive cleaning chemicals |
| SS 304L | S30403 | 1.4307 | Dairy, food, beverage, winery, general hygienic & utility lines |
| Duplex 2205 | S31803 / S32205 | 1.4462 | High yield strength, extreme chloride resistance, chemical & coastal duty |
| Super Duplex | S32750 / S32760 | 1.4410 / 1.4501 | High-pressure aggressive acids, offshore, harsh petrochemical streams |
| Service | Typical Industry Band | Ra µin (exact) | Sakshi Forge Offer |
|---|---|---|---|
| Pharma / biotech | Ra ≤0.25 to ≤0.4 µm | 9.8 to 15.7 µin | Standard: ≤0.4 µm (ASME BPE SF4) |
| Dairy / food / beverage | Ra ≤0.6 to ≤0.8 µm | 23.6 to 31.5 µin | Within standard offer (≤0.4 µm) |
| Semiconductor / UHP | Ra ≤0.13 to ≤0.25 µm | 5.1 to 9.8 µin | Available on custom drawing spec |
Weight (kg/m) = (OD − WT) × WT × K, where K = 0.02491 (304/304L, 7.93 g/cm³), 0.02507 (316/316L, 7.98 g/cm³) and 0.02450 (Duplex 2205, 7.80 g/cm³).
| Nominal Size | OD (mm) | WT (mm) | 304L (kg/m) | 316L (kg/m) | Duplex 2205 (kg/m) |
|---|---|---|---|---|---|
| ½" | 12.7 | 1.65 | 0.454 | 0.457 | 0.447 |
| ¾" | 19.05 | 1.65 | 0.715 | 0.720 | 0.703 |
| 1" | 25.4 | 1.65 | 0.976 | 0.982 | 0.960 |
| 1½" | 38.1 | 1.65 | 1.498 | 1.508 | 1.473 |
| 2" | 50.8 | 1.65 | 2.020 | 2.033 | 1.987 |
Interactive specification explorer with live filters (DOM-preserved for search indexing)
| Grade | Type | OD Range | Wall / Schedule | Internal Ra | Standards |
|---|---|---|---|---|---|
| SS 316L | Welded | ½" to 2" (12.7–50.8 mm) | 1.65 mm / SCH 10S | ≤0.4 µm (SF4) | ASTM A269 / A270, ASME BPE |
| SS 316L | Seamless | ½" to 2" (12.7–50.8 mm) | 1.65–2.77 mm / SCH 40S | ≤0.4 µm (SF4) | ASTM A269, ASME BPE |
| SS 316L | Welded | 2½" to 6" (63.5–152.4 mm) | 2.11–2.77 mm / SCH 10S | ≤0.4 µm | ASTM A269 / A270 |
| SS 316L | Seamless | 2½" to 6" (63.5–152.4 mm) | 2.77–3.05 mm / SCH 40S | ≤0.4 µm | ASTM A269 |
Instant dimension calculation and Ra unit conversions for engineering procurement
Oils, cutting fluids and drawing residues are completely removed first. The finish is only as good as the chemical preparation.
Where weld heat tint or surface oxide is present, it is etched and activated so the pipe surface electropolishes uniformly.
The pipe acts as anode in an electrolytic acid bath. High microscopic peaks dissolve first, levelling the surface and stripping free iron.
The chromium-rich passive layer is stabilised per ASTM A967 / ASTM B912 to prevent future pitting and galvanic attack.
High-purity deionised water rinse removes all electrolytic residues, followed by hot air drying, capping and clean poly-sleeving.
| Document / Test | Status / Scope |
|---|---|
| MTC EN 10204 3.1 with heat-number traceability | Confirmed (Standard with every dispatch) |
| 100% PMI test and certificate | Confirmed (Handheld XRF on every pipe length) |
| Ra surface roughness test (stylus profilometer) & surface report | Confirmed (Supplied with measured Ra values) |
| Hydro (leak and pressure) test & certificate | Confirmed (Hydrostatic tested per ASTM spec) |
| Passivation verification and ferrite check | Confirmed (Reported in quality dossier) |
| QA inspection report and mill traceability | Confirmed (Approved origin mills) |
| Third-party inspection (TÜV / Bureau Veritas / SGS / DNV) | Accepted upon customer request |
Send your grade, OD × wall, Ra requirement, length and quantity. We'll quote within 24 hours.
Shop No. 05, Ground Floor, 113/117, Dr. MG Mahimtura Marg, 3rd Kumbharwada, Mumbai, Maharashtra 400004
Click below to view our direct engineer phone numbers, dispatch contacts, and official sales email.
We dispatch from Mumbai, and delivery time depends on size, quantity and stock; it is confirmed in writing with each quotation.
Every pipe we supply to Bidar adheres to strict international hygienic standards. Explore our core product specifications, Ra roughness certifications, and alloy grade properties: