Electropolished Socket: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.
Electropolished Sockets provide a socket weld hygienic connection between a tube and fitting, machined with a smooth, low-Ra bore for high-purity service.
A socket-weld fitting receives the pipe end into a socket and is fillet welded around the outside. Before welding, the pipe is withdrawn about 1.6 mm (1/16") from the socket bottom so the weld does not crack as it cools. That gap stays inside the joint as a crevice.
On high-pressure utility and chemical lines the crevice is acceptable. On a product line cleaned in place it is not, because product collects in the gap and cannot be cleaned or inspected. Hygienic systems use butt-welded tube fittings or clamp joints instead. Socket-weld fittings are covered by ASME B16.11 in Class 3000, 6000 and 9000.
Last updated 2026-11-03
Read commonly asked questions about specifying and ordering Electropolished Socket.
Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.