HomeElectropolished Pipe FittingsElectropolished End Cap
Electropolished Pipe Fittings

Electropolished End Cap – Sanitary Tube End Closure

Quick Technical Summary

Electropolished End Cap: supplied by Sakshi Forge, Mumbai, in SS 316L/304L, ASME BPE compliant, Ra ≤ 15 µin (0.38 µm) ID electropolished finish. EN 10204 3.1 MTC + PMI standard. Quote within 24 hours: +91 82913 66340.

Electropolished End Caps close off the end of a sanitary tube run, providing a hygienic, crevice-free seal for line termination or future connection points.

Key Features

Complete hygienic end-of-line closure Orbital TIG weld end Electropolished to Ra ≤15 µin (0.38 µm) Domed or flat profile options

Technical Specifications

ProductElectropolished End Cap
GradeSS 316L / 316, SS 304L (as specified)
Size Range1/2" – 6" Tube OD
Surface FinishRa ≤15 µin (0.38 µm)
End ConnectionOrbital Weld / Buttweld
Wall ThicknessMatched to the tube wall (ASME BPE: 0.065" / 1.65 mm for 1/2"–3" OD)
StandardsASME BPE, ISO 1127, DIN 11850
Target IndustriesPharmaceutical
Available GradesSS 316L / 316, SS 304L (as specified)

Target Application Industries

PharmaceuticalBiotechnologyFood & BeverageDairyCosmetics

Applications & Service Areas

Line Termination | Test Point Closures | Future Tie-in Points
Electropolished End Cap
Quick Quotation

Request Price & Specs

MTC EN 10204 3.1 & Inspection provided
Pan-India & global sea-freight dispatch
Custom dimensions/drawings supported
Quotation within 24 hours

What an Electropolished End Cap Does

A weld end cap closes the end of a tube permanently. In a hygienic system it is used to terminate a header that may be extended later, to close a drain stub or to make up a test piece. Because it closes a line for good, it should be placed where the closed end is swept by flow or drains completely, otherwise it is a dead end.

Where the end must be opened for inspection or future connection, a clamp ferrule with a blind cap is easier to work with than a welded cap that must be cut off.

Points to Check

  • Location: avoid capped ends on branches that see no flow during CIP.
  • Orientation: on a sloped header, the capped end should be the high end only if the header drains the other way.
  • Weld: the cap is orbital welded to the tube end; check the weld bead with a borescope from the open side before it is closed in.

Ordering End Caps

  • Tube OD and wall, dimension series.
  • Grade and internal finish.
  • Documents: EN 10204 3.1 certificate traced to heat number, PMI record per piece and a measured Ra report for each electropolished lot.
Request an end cap quotation

Last updated 2026-11-03

Frequently Asked Questions

Read commonly asked questions about specifying and ordering Electropolished End Cap.

An end cap is welded to the tube and closes it permanently. A blind cap clamps onto a ferrule and can be removed.

Partner with Sakshi Forge for Reliable Industrial Steel Solutions

Delivering precision-engineered flanges, pipes, and forged steel components designed for strength, durability, and performance in critical high-pressure industrial applications.

We use cookies for analytics and to improve your quote experience. See our Privacy Policy.